Concrete Block Machinery Catalog
Discover our full range of European-design block making machines and turnkey production lines -- engineered for global infrastructure & housing projects.
- Products
- 1114+
- Categories
- 7
- Export
- 108+
QTJ4-24 Semi Automatic Block Machine – PLC Control
<p><strong>QTJ4-24 Semi-Automatic Block Machine, 11.95kW, 900×450mm Pallet, Table & Fluctuation Vibration</strong> — electrical control coordinates upper and lower vibrators with mould lifting, while two selectable feed methods match varying mix consistency. Molding cycle holds at 24-26s for batch-to-batch uniformity, with manual pallet handling defining the semi-automatic scope. We confirm voltage, frequency and control language in writing before production, and specify the machine against your actual mix design and target block format.</p> <ul> <li>400×200×200mm (4 pcs/mould), 390×120×190mm (6 pcs/mould), 240×115×53mm (21 pcs/mould)</li> <li>Stationary setup on precast concrete ground, 3600×1700×2560mm footprint</li> </ul>
- Automation
- Fully Auto
- Sold
- 50+ units
Intelligent Block Making Machine – QT10-15 Fly Ash Brick Plant
<p><strong>QT10-15 Automatic Block Making Machine, 20g Vibration Acceleration, PLC Control</strong> — configured as an intelligent production platform where four-axis forced synchronization and frequency conversion vibration ensure even excitation across the mould. Selectable automation levels allow a progressive upgrade path from semi-automatic pallet handling to fully automatic stacking and cubing, removing manual inconsistency from the operator's daily workflow.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system against your actual mix design and local aggregate</li> <li>PLC display language and voltage confirmed before production to eliminate commissioning delays after arrival</li> <li>Factory test record provided with your specified mould, demonstrating cycle time and block consistency for your target format</li> </ul>
- Automation
- Fully Auto
- Sold
- 50+ units
QTJ4-40 Block Machine for Hollow Block and Fly Ash Brick – Automatic
<p><strong>QTJ4-40 Concrete Block Making Machine, 9.5 kW, 40 s Molding Cycle</strong> — configured with dual vibration combining bed vertical and upper compression for uniform block density, paired with top die push-pull and automatic scraper for repeatable semi-automatic cycles.</p> <ul> <li>Pallet size 850×450 mm confirmed upfront so curing rack layout and site forklift can be planned before installation</li> <li>Upgrade path available from semi-automatic toward PLC-controlled stacking and cubing as output requirements grow</li> </ul> <p>Every configuration is set against the buyer's actual mix design, local aggregate and target block format rather than a catalogue default, with mould drawings and capacity calculations stated per block size.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
QT5-15 Hollow Block Machine | Automatic PLC Control191
<p><strong>QT5-15 Hollow Block Making Machine, 80 kN Vibration Force, PLC Touch-Screen Control</strong> — removes manual pallet handling through sequenced automation where material dosing, platform vibration and hydraulic demoulding run as one matched cycle, with recipe storage per mould format so changeovers resume without re-tuning pressure from scratch. Configured against your actual mix design and local aggregate, with upgrade path from automatic press to full stacking and cubing documented before shipment.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
Intelligent Block Making Machine for Hollow Block – QT4-20
<p><strong>QT4-20 Hydraulic Vibration Block Making Machine, 16-21 MPa, 45 kN, PLC Control</strong> — engineered for consistent hollow and solid block production with selectable automation from semi-automatic pallet feeding through to fully automatic stacking and cubing. The platform vibration at 4600 r/min is matched to hydraulic demolding pressure, ensuring batch-to-batch block strength aligned with your local aggregate and mix design.</p> <ul> <li>Mould change system reduces format changeover time, keeping production flexible across hollow blocks, pavers and curbstones</li> <li>Automation level configurable to your current labour model, with clear upgrade path as output scales</li> </ul> <p>Backed by single-focus block machinery engineering, every station from press to stacking is specified as one matched system, with voltage, PLC language and capacity confirmed per your exact block format before production.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
QT4-15 Brick Making Machinery with PLC Control – Automatic
<p><strong>QT4-15 Hydraulic Concrete Block Making Machine, PLC Control, 15-20s Cycle Time</strong> — fully automatic operation with computer-controlled logic governing feeding, pressing, and stacking stations.</p> <ul> <li>Multiaxis synchronizer vibration delivers vertically downward compaction force matched to your mix design and local aggregate.</li> <li>Long-period guide bearings ensure precise upper mould and mould box alignment across every cycle, supporting consistent block density.</li> <li>Mould changeover routines are programmable, reducing format switching downtime and preserving the flexibility of your product range.</li> </ul> <p>Configured against your actual block format, raw material, and site conditions — not a catalogue default — with pallet size and automation level confirmed before production.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
QT12-15 Flyash Bricks Brick Making Machine – Automatic
<p><strong>QT12-15 Automatic Block Making Machine, 62 kW Total Power, 1300×900 mm Pallet</strong> — fully automatic with PLC-controlled cycle and four-axis vibration technology.</p> <p>This machine focuses on intelligent control and automation, removing manual pallet handling and stacking from the operator. Frequency conversion motor drive allows vibration force adjustment to match your aggregate and mix design, ensuring batch-to-batch consistency across hollow blocks, pavers and flyash bricks.</p> <p>Configuration set against your actual mix design and target block format, with automation level selectable so you can start semi-automatic and upgrade later.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
Concrete Block Making Machine QTJ4-24 | Intelligent
<p><strong>QTJ4-24 Concrete Block Making Machine, 4200 r/min Vibration, 900×450mm Pallet</strong> — semi-automatic platform vibration with rated exiting force of 35.5KN delivers batch-to-batch consistency for hollow blocks, solid blocks, and pavers using crushed stone, sand, cement, and fly ash.</p> <ul> <li>PLC-ready configuration with clear upgrade path to automatic pallet feeding, stacking, and cubing as your volume grows</li> <li>Vibration parameters adjustable to match your local aggregate and mix design for target block strength</li> <li>Factory-tested as one matched system — machine, mould, pallet, and handling specified together so the press is never left waiting</li> </ul>
- Automation
- Fully Auto
- Sold
- 50+ units
PLC Control QT10-15 Cement Block Machine for Hollow Block
<p><strong>QT10-15 Cement Block Making Machine, PLC Control, Independent Hydraulic Station</strong> — configured for multi-format production with vertical resonance vibration and automatic FM-AM compaction.</p> <p>Cycle time and output vary by block format: 15-20s for hollow blocks, 20-25s for pavers, with mould quantities per cycle clearly stated for accurate capacity planning. Quick mould replacement enables switching between hollow block, paving block, and standard brick formats within a single shift.</p> <ul> <li>Automation scope, pallet handling, and stacking configuration confirmed before quotation</li> <li>Voltage, frequency, and PLC display language verified to match your site requirements</li> <li>Line layout and capacity calculation provided per block format, not generic cycles per hour</li> </ul>
- Automation
- Fully Auto
- Sold
- 50+ units
QT4-15B Automatic Concrete Block Making Machine – PLC Control
<p><strong>QT4-15B Automatic Concrete Block Making Machine, PLC Control, 15–20s Molding Cycle</strong> — fully computer-controlled with multiaxis synchronizer vibration and over-length guide bearings for precise mould alignment. Hydraulic pressure and vibration force are configured against your local aggregate and mix design rather than a catalogue default, ensuring consistent block strength across hollow blocks, pavers and standard bricks.</p> <ul> <li>Capacity stated per format, e.g. 900–1,200 pcs/h based on 400×200×200mm hollow block</li> <li>Automation upgrade path from semi-automatic to full PLC operation</li> <li>Voltage, frequency and PLC display language confirmed before production</li> </ul> <p>Delivered with line layout, factory test record and operator training — the press, moulds, pallets and handling are specified as one matched system.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
QT6-15 Hollow Brick Making Machine with PLC Control – Automatic
<p><strong>QT6-15 Hydraulic Block Making Machine, PLC Touch Screen, 0-60Hz Vibration</strong> — configured for consistent block production across formats.</p> <p>The PLC control system with fault diagnosis reduces operator dependency, while the independent hydraulic station stays isolated from vibration to maintain pressure accuracy. Platform vibration pairs with hydraulic force to achieve uniform density across hollow, solid and paving formats.</p> <ul> <li>Output up to 1440 pcs/h based on 400×200×200mm hollow block</li> <li>Pallet size 880×850mm, overall power 37KW</li> </ul> <p>Backed by single-focus block machinery expertise where machine, mould and handling are specified as one matched system.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
PLC Control Automatic Block Moulding Machine – QT8-15
<p><strong>QT8-15 Automatic Block Moulding Machine, PLC Control, 21 MPa Rated Pressure</strong> — designed for plants moving from semi-automatic to fully automated production.</p> <ul> <li>Platform vibration at 45 kN with 2800–4500 r/min adjustable frequency, matched to your mix design</li> <li>15–20 s moulding cycle with hydraulic demoulding for consistent block density across shifts</li> <li>950×900 mm pallet size — confirm compatibility with existing curing racks before ordering</li> </ul> <p>Voltage, PLC display language, and capacity per block format confirmed before production starts, with full electrical and hydraulic schematics delivered for on-site maintenance.</p>
- Automation
- Fully Auto
- Sold
- 50+ units
International compliance certified
Fast global parts delivery
Strong technical support team
Worldwide export experience
Need a customized production line?
Tell us your target capacity, raw materials and project timeline. Our engineers will respond within 24 hours with a full proposal -- line layout, BOM and FOB pricing.
- 24-hour response with full company profile & spec sheet
- Free customization for local materials & site conditions
- Overseas commissioning & operator training included