Concrete Machinery · Engineered for Industrial Production

Stationary block machine

Browse our stationary block machine series -- European-designed concrete machinery with airbag systems and four-vibration motors for superior block density and reliability.

Products

311

QT10-15 Automatic Block Making Machine PLC Controlled – Intelligent

QT10-15 Stationary Block Machine, 1100×900mm Molding Area, 100kN Hydraulic Vibration — engineered for plants moving beyond manual operation. Siemens PLC with touch screen manages cycle timing, batching coordination, and pallet flow as one integrated system, removing operator guesswork from hollow, solid, and paving block production. <ul> <li>Full line synchronization: PLD1200 batching, JS750 mixer, pallet feeder, and SY-8 stacker controlled through single PLC interface</li> <li>Mould carburizing treatment reaches 54–58 HRC hardness, rated for extended production runs across format changes</li> <li>Vibration frequency 2800–4500 times/minute matched to your local aggregate and mix design for consistent block density</li> </ul> We configure the complete pressing, mould, pallet and handling system as one matched unit against your actual mix design, target block format, and site conditions — not catalogue defaults.

View Details

Stationary block machine

QTJ4-24 Semi Automatic PLC Control Block Machine – Intelligent1

QTJ4-24 Semi-Automatic Block Machine, PLC Control, 11.95 kW, 850×450 mm Pallet — pairs programmable cycle management with full-automatic spiral material distribution and dual-level vibration (45 kN) to remove feeding inconsistency and deliver repeatable block density across hollow, solid and paving formats. Mould lifting handled by a 350-type reducer for extended service intervals. <ul> <li>Configured as one matched system against your local aggregate and target block format, with voltage, frequency and PLC display language confirmed before production begins.</li> </ul>

View Details

Stationary block machine

QTJ4-24 Stationary Block Making Machine with PLC Control – Automatic1

QTJ4-24 Stationary Block Making Machine, PLC Control, 11.95kW, 45kN Vibration — featuring full-automatic spiral material distribution for uniform feeding and consistent block density across cycles. The PLC system governs the entire molding process, reducing operator dependency while maintaining repeatable output for hollow, solid, paving, and interlocking formats. Machine, mould, pallet and handling are specified as one matched system against your actual mix design and target format.

View Details

Stationary block machine

Automatic Stationary Concrete Block Making Machine – PLC Control

QT4-18 Stationary Concrete Block Making Machine, 24KW, 40-50KN Vibration, PLC Control — configured as a matched system where hydraulic pressure and dual vibration are balanced to your mix design and target block format. <ul> <li>PLC voltage, frequency, and display language confirmed before production</li> <li>Pallet size 850×550×25mm selected to match your curing area and forklift</li> <li>Mould change system specified to keep format switching within a shift</li> </ul> Capacity, cycle time, and automation level are documented per block format in your line layout, so daily output matches the proposal you approved.

View Details

Stationary block machine

Concrete Block Molding Machine QTJ4-24 with PLC Control – Intelligent

QTJ4-24 Stationary Block Machine, PLC Control, 45 kN Vibration Force, 850×450 mm Pallet — configured for consistent block density through dual-level vibration (2×3 kW lower + 2×1.5 kW upper) and full-automatic spiral material distribution, removing operator-dependent feeding variation from each cycle. <ul> <li>350-type reducer dedicated to mold lifting for reliable daily changeover</li> <li>Mechanical press structure with PLC sequencing for straightforward maintenance</li> </ul> Machine, mould, pallet and handling are specified as one matched system, with automation scope clearly defined so you know exactly which stations are included before order.

View Details

Stationary block machine

QTJ4-24 Block Making Machine for Hollow Block – PLC Control

QTJ4-24 Stationary Block Making Machine, 850×450mm Pallet, 45kN Vibration Force, 11.95kW — configured for hollow block, solid brick, and interlocking paving formats. The dual-level vibration system (lower + upper) paired with full-automatic spiral material distribution ensures batch-to-batch consistency across varying local aggregate conditions, while the selectable automation path supports gradual PLC integration from semi-automatic operation. Mould configuration and factory testing validated against your specific mix design before shipment. <ul> <li>Vibration: 2×3kW lower + 2×1.5kW upper vibrators</li> <li>Molding cycle: 24–26s per format</li> <li>Control language and voltage confirmed pre-production</li> <li>Upgrade path to automated pallet feeding and stacking</li> <li>Includes mould drawing, format list, and wear parts documentation</li> <li>CE declaration available upon request for applicable markets</li> </ul>

View Details

Stationary block machine

Automatic Concrete Block Brick Making Machine – PLC Control85

QT4-18 Hydraulic Automatic Concrete Block Making Machine, PLC Control, 900×500mm Pallet, 0-60Hz Vibration — configured around your local aggregate and target block format rather than catalogue defaults. <ul> <li>PLC interlocks vibration force, hydraulic pressure and demolding into one coordinated cycle, so the operator supervises instead of manually timing each step</li> <li>Hydraulic demolding reduces block breakage at extraction compared to mechanical ejection</li> <li>Mould change supports hollow blocks, solid bricks, pavers and kerbstones within the 18-25s cycle range</li> </ul> Machine, mould, pallet and handling specified as one matched system from a single-focus block machinery supplier.

View Details

Stationary block machine

QTJ4-24 Stationary Block Machine | Automatic

QTJ4-24 Stationary Block Machine, 45 kN Vibration, PLC Controlled, 850×450 mm Pallet — integrates dual-zone upper and lower vibration with full-automatic spiral material distribution for consistent compaction across hollow and paving block formats. <ul> <li>Molding cycle 24-26 s with PLC repeatability, 350-type reducer dedicated to mould lifting</li> <li>Semi-automatic base with selectable automation upgrade path for stacking and handling</li> </ul> Configured against your actual mix design and local aggregate, with pallet size matched to your existing curing layout and forklift.

View Details

Stationary block machine

QTJ4-40 Block Making Machine for Hollow Concrete | Intelligent

QTJ4-40 Semi-Automatic Block Making Machine, 10.4 kW, 40 s Moulding Cycle, 850×450 mm Pallet — engineered for hollow, solid and paver block production with bed mould vertical vibration combined with upper mould compression for consistent density across batches. Output capacity is stated per block format, and automation level is selectable from manual pallet handling through to automatic feeding, stacking and cubing as your plant scales. - Machine, mould, pallet and handling specified as one matched system, with configuration set against your local aggregate and target block format.

View Details

Stationary block machine

QTF3-20 Stationary Block Machine for Hollow Block and Paving Brick – PLC Control

QTF3-20 Stationary Block Machine, 17.5 kW, PLC Control — hydraulic-driven press with platform vibration and no-contact proximity switch monitoring for repeatable cycle parameters. Double-layer feeding enables color paver production without a separate facing machine. Welded #12 U-bar frame absorbs sustained vibration forces. Automation level selectable from semi-automatic base toward full stacking and cubing as output scales. PLC display language, voltage and frequency confirmed against your site before production; machine, mould and pallet specified as one matched system, not assembled from separate suppliers.

View Details

Stationary block machine

QT5-15 Automatic Block Making Machine with PLC Control – Intelligent

QT5-15 Stationary Block Machine, 21MPa Hydraulic Pressure, PLC Control — fully automatic with platform vibration operating between 2800 and 4500 r/min, removing manual pallet handling from the operator for consistent batch-to-batch density. <ul> <li>Pallet size 1100×550mm selected to match existing curing area and forklift capacity</li> <li>Automation path allows stacking and cubing to be added as volume grows</li> <li>Hydraulic pressure and vibration force configured against your local aggregate and mix design</li> <li>Voltage, frequency and PLC display language confirmed before production begins</li> </ul> Supplied with line layout, capacity calculation per block format, hydraulic schematic and mould drawing as one matched system.

View Details

Stationary block machine

QT8-15 Automatic Stationary Concrete Block Machine – PLC Control

QT8-15 Automatic Stationary Concrete Block Machine, 37 kW, PLC Control — designed for consistent output across hollow, solid, paving and interlocking formats. <ul> <li>Platform vibration with variable frequency 2800–4500 r/min matched to mix design and block format</li> <li>PLC fault diagnosis and remote monitoring reduce operator dependency and unplanned downtime</li> <li>Pallet size 950×900 mm, factory area 600 m², voltage customized to local supply</li> </ul> Configuration set against your actual mix design, local aggregate and target block format — machine, mould and pallet specified as one matched system.

View Details

-- Custom Engineering

Can't find the right machine? Let's customize one.

Our 320+ engineers tailor concrete machinery to your raw materials, capacity targets and site conditions. Get an engineering proposal within 24 hours.

Request Custom Quote +86 156 5020 7099